Sharpie lines on the back and a shot of clear coat.
Art Guitar Project
I found this 3/4 scale harmony at the guitar show with a broken neck for $5. A little wood glue and about 8 feet of surgical tubing to clamp it up and it’s playable again. I have a gfs humbucker that I’m going to mount in the sound hole, I’ll wire it with a coil tap, volume and tone. Top back and sides will receive some sharpie art.
A silver tone type case might be nice.
Uke Case Update
Bluesbreaker Update
aluminum etching
Cool aluminum etching tutorial here:
http://www.instructables.com/id/How_to_etch_aluminum_panel_labelsdesigns_with_a_r/
This might be a better solution for the philco project
A great set of legs
I trust the bish
A Busy Sunday III
A Busy Sunday II
A Busy Sunday

I started the day early (about 6:30) and worked on Rio for two hours. After that Mona and I went to to Antrum to run with fellow Jack Turtles Wendy, Conchetta, Jeff and Anna. 5.1 miles at a conversation pace felt good. Bill joined us for breakfast at Bob Evans where I indulged in a down home breakfast.







